1. Preparation before installation
Make sure the purchased Extra Long Chrome Shower Flexible Tube and its accessories (such as joints, washers, etc.) are intact and have no signs of rust, cracks or damage. Before installation, be sure to turn off the main water valve in your home to prevent accidental water leakage during installation. Prepare the necessary tools, such as wrenches, screwdrivers, pipe clamps, etc., for use during installation.
2. Installation steps
Use a clean cloth or paper towel to clean the shower outlet and the interface on the wall to ensure that there is no dust, dirt or water stains. Install the gasket at the shower outlet and the wall interface. The function of the gasket is to seal the interface to prevent water leakage. Make sure the gasket is installed correctly without twisting or damage. Connect one end of the Extra Long Chrome Shower Flexible Tube to the shower outlet and the other end to the wall interface. During the connection process, make sure that the tube fits tightly with the interface without looseness or gaps.
Use pipe clamps or other fixings to fix the shower pipe to the wall to prevent it from shaking or falling off during use. When fixing, make sure the pipe clamp is tightened in place, but not too tight to avoid damaging the pipe. After installation, open the main water valve and check the connection for leaks. If leaks are found, turn off the water supply immediately and recheck the installation process to ensure that all interfaces are tightly connected and gaskets are installed.
3. Precautions
During the installation process, avoid excessive bending or twisting of the Extra Long Chrome Shower Flexible Tube to avoid affecting its service life and performance. During installation and use, be careful not to let the water temperature be too high to avoid damage to the shower pipe. In order to ensure the normal use of the shower pipe and prevent water leakage problems, it is recommended to regularly check whether the connections and gaskets of the shower pipe are intact.